-
Bridging gaps up to 20 mm
-
UV- and weather-resistant
-
Can be used down to -5 °C
-
Bitumen resistant
-
Compatible with common building substrates
-
Colour: Black
TEROSON® AD KDS was developed for bonding sealing strips to the building shell and/or facade/window element, e.g. TEROSON FO 2 / FO 2 SK 1 and all other sealing strips from the TEROSON range and also bonding EPDM strips/membranes.It can be easily used for sealing penetrations, e.g. cable ducts, threaded rods etc. in combination with TEROSON sealing strips.
The contact areas/joint edges must be clean, dry and free of grease. TEROSON AD KDS adheres without primer on substrates such as sheet metal (raw, degreased, phosphated, hot-dip galvanized, topcoated), stainless steel, brass, aluminum (raw, anodized, painted and powder-coated), PC, ABS, EPDM (preliminary tests required), PA and rigid PVC.
Apply strands of TEROSON AD KDS to the substrate using either a manual or a compressed air gun (pressure 0.5 to 5 bars). Afterwards, press the sealing strip into the adhesive paste while it is still fresh and skin-free. Roll the strip over with a pressure roller. TEROSON AD KDS should not be used below -5 °C and not above +40 °C.
Immediately remove excess adhesive or stains with a cloth. After curing, the adhesive can only be removed mechanically.
Yes, the product can be processed down to -5 °C.
Yes, the product is very low in emissions and has the EMICODE EC1 plus certificate.
No, the product is only available in black and in a 570 ml tubular bag.