- Elastoplastic: 10 % movement accommodation
- Easy gun application
- Compatible with all kinds of paints
-
Elastoplastic: 10 % movement accommodation
-
Easy gun application
-
Compatible with all kinds of paints
-
Self-adhesive on most common building materials
-
Ageing-resistant
TEROSON® SE 20 is an acrylic sealant, generally compatible with paints ,easy to apply by gun, virtually odorless and self-adhesive on most common building substrates.
The surfaces to be bonded/joint edges must be clean, dry and free of grease. TEROSON SE 20 adheres without primer on substrates such as plasterboard, concrete, gas concrete, aerated concrete, varnished wood (closed-pore or open-pore), brickwork and rigid PVC. Old sealants and other residues must be completely removed. The bonding surfaces must not be covered with a water film.
TEROSON SE 20 is a gunnable, physically drying 1-component sealant that is applied by means of a hand or compressed air gun. Uneven areas can be smoothed with a trowel, paint brush or jointing iron after slightly moistening the tool or sealant surface with water. We recommend masking the joint edges with a self-adhesive tape before applying the sealant.
Immediately remove excess sealant or stains with a wet cloth or spirit. After curing, the sealant can only be removed mechanically.
Yes, the product is very low in emissions and has the EMICODE EC1 plus certificate.
The elasticity of this pure acrylate sealant is 10%.
The product is vulnerable to frost. The temperature during storage must not fall below +5 °C. It is best between +5 °C and +25 °C. Can be stored for 18 months.