Roller shutter boxes can also be sealed on the inside with the film. In practice, it has been shown that when sealing roller shutter boxes, the window connection foil should be bonded overlapping in the corners (052). Sealing in the corner area with a loop formation is not possible due to the numerous corners on the roller shutter box. The foils must be pressed firmly against the substrate with a hard rubber roller, especially in the corner area (053).
Positioning the foil on the roller shutter box
052 | Front attachment of the foil
053 | Pressing on the foil in the corner area
Sealing with FO 1 FOIL-TACK and PT ecoMAX 600
Sealing with TEROSON FO 1 FOIL-TACK in exterior areas
