-
Can be used on damp and wet surfaces
-
High initial tack
-
Surface-strengthening effect
-
Fast and clean bonding
-
High yield, economical in use
-
Rapid drying
TEROSON® AD ADHESIVE SPRAY is particularly well suited for surface strengthening and for bonding TEROSON sealing strips at low temperatures and on damp, even wet surfaces (no standing water).
The surfaces to be bonded must be clean, solid and free of release agents, oil and grease. Old and loose plaster layers must be removed before applying the adhesive.
Shake TEROSON AD ADHESIVE SPRAY well before use. Apply the adhesive directly from the can to the bonding surfaces (spraying distance: 20-25 cm). The 6-way adjustable spray head enables horizontal and vertical application in 3 different spray widths. Allow the sprayed parts to flash off for approx. 10-20 minutes, depending on application method.
Excess adhesive can only be removed with ethanol while still fresh and uncured. After curing, the adhesive can only be removed mechanically
The product is colorless-transparent to slightly beige.
Depending on the absorbency and condition of the substrate, the consumption is between 150-250 g/m².
In a cool and dry storage for 12 months.