-
Flame-retardant (B-s1, d0)
-
UV- and weather-resistant
-
Gap-bridging up to 20 mm
-
Can be used down to -5 °C
-
Bitumen resistant
-
Colour: Gray
TEROSON® AD KDS FR is a flame retardant special adhesive for safe fire protection. The special film adhesive adheres to all common building material substrates. It is easy and uncomplicated to process down to -5°C. The special polymer-based adhesive is suitable for bonding sealing films, such as TEROSON Fire Protection Film FO 2 FR.
The contact areas/joint edges must be clean, dry and free of grease. TEROSON AD KDS FR adheres without primer on substrates such as sheet metal (raw, degreased, phosphated, hot-dip galvanized, topcoated), stainless steel, brass, aluminium (raw, anodized, painted and powder-coated), PC, ABS, EPDM (preliminary tests required), PA and rigid PVC.
Apply strands of TEROSON AD KDS FR to the substrate using either a manual or a compressed air gun (pressure 0.5 to 5 bars). Afterwards, press the sealing strip into the adhesive paste while it is still fresh and skin-free. Roll the strip over with a pressure roller.
Immediately remove excess adhesive or stains with a cloth. After curing, the adhesive can only be removed mechanically.
The product is flame retardant with B-s1, d0 according to DIN EN 13501.
Yes, the product is very low in emissions and has the EMICODE EC1 plus certificate.
No, the product is only available in the color gray and in a 600 ml tubular bag.