TEROSON AD SP

Water-based special polymer bonding adhesive

  • Good adhesion and compatibility with paints
  • Easy application with TEROSON tubular bag gun
  • Stress-free bonding of TEROSON FO 1 / 50 sealing strips to the building shell

Features and benefits

Water-based special polymer for bonding plasterable window sealing foils (from +5 °C) on dry substrate.

Properties

Description

TEROSON® AD SP - water-based special polymer for bonding plasterable sealing strips in the areas of facade & window installation. For bonding sealing strips to the building shell, e.g. TEROSON FO 1 SK and FO 50 SK.

Documents and downloads

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

SUBSTRATE PREPARATION

Clean the substrate before applying the adhesive. The surfaces to be bonded must be load-bearing, sound and free of dust, oil, grease, release agents, sintered layers or other substances likely to impair adhesion.

CERESIT Tiling CE60 LP Instructions Illustration Step 2

APPLICATION:

Apply the adhesive paste in strands to the building shell using either a manual or a compressed air gun (air pressure 2 to 5 bars). Afterwards, press the sealing strip into the still fresh but skin-free adhesive paste. Finally, roll it down with a TEROSON hard rubber roller. 

CERESIT Tiling CE60 LP Instructions Illustration Step 3

CLEANING

Immediately remove excess adhesive or stains with a cloth. After curing, the adhesive can only be removed mechanically. 

Related products

  • ${/content/heliux/adhesive/teroson/com/en/products/central-pdp#/teroson-fo-1-sk/SAP_0201INT064W1/searchResult.productFields.MainImageAltText}
    TEROSON FO 1 SK
    Diffusion-capable and plasterable universal sealing strip for the air- and windtight sealing of connections – outdoor use (cold side of the building) 
  • ${/content/heliux/adhesive/teroson/com/en/products/central-pdp#/teroson-fo-50-sk/SAP_0201INT064W8/searchResult.productFields.MainImageAltText}
    TEROSON FO 50 SK
    Vapor-retarding and plasterable universal sealing strip for the air- and windtight sealing of connections – indoor use (warm side of the building). 
  • ${/content/heliux/adhesive/teroson/com/en/products/central-pdp#/teroson-ef-537/SAP_0201IPT064Q1/searchResult.productFields.MainImageAltText}
    TEROSON EF 537
    The all-in-one solution for insulation, protection and installation. 

Frequently asked questions

No, however, the product can be processed up to +5 °C. At lower temperatures down to -5 °C, our AD KDS is used.

Yes, the product is very low in emissions and has the EMICODE EC1 plus certificate.

No, the product is only available in the color white and in a 600 ml tubular bag.