TEROSON FO 150 FOIL-TACK M+S

FULL-SURFACE SELF-ADHESIVE SEALING MEMBRANE

  • Fully self-adhesive
  • Immediately waterproof, driving rain and airtight
  • Compliant with DIN 18533 for highest requirements

Features and benefits

Full-surface self-adhesive special sealing strip, water-, air- and diffusion-tight, equipped with hotmelt technology for facade elements, windows, house door connections

Properties

Description

TEROSON® FO 150 FOIL-TACK M+S is traditionally used on curtain walls and ensures the vapor-proof and airtight sealing of facade elements. It prevents the penetration of water vapor and the formation of condensation. This product features an enormous range of applications in window and facade sealing.

Documents and downloads

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

SUBSTRATE PREPARATION

Clean the substrate before fixing the sealing strip. The areas to be sealed must be load-bearing, sound and free from dust, release agents, oil, grease, sintered layers and other substances that may impair adhesion. All metal substrates, e.g. element surfaces of aluminum or zinc, must be free of oxide layers and release agents.

CERESIT Tiling CE60 LP Instructions Illustration Step 2

APPLICATION: Use of primers

On mineral, weakly bound but load-bearing substrates it is recommended to apply a TEROSON primer. In adverse weather conditions, the use of adhesion promoters is required on mineral substrates. Particularly suitable at low temperatures and on damp substrates is TEROSON PR Primer M+S. On wet substrates (no standing water), use TEROSON AD Adhesive Spray. 

CERESIT Tiling CE60 LP Instructions Illustration Step 3

CONNECTION SEALS ON WINDOWS / FACADES

TEROSON FO 150 FOIL-TACK M+S is equipped with an asymmetrically divided release film. After peeling off the 30 mm wide film, this part of the sealing strip can be fixed cleanly and efficiently to the profile/frame. After, pull the release film off the self-adhesive hotmelt coating. 

Related products

  • ${/content/heliux/adhesive/teroson/com/en/products/central-pdp#/teroson-pr-primer-ms/SAP_0201IOT065K8/searchResult.productFields.MainImageAltText}
    TEROSON PR PRIMER M+S
    Bonding course and surface strengthener for mineral and bituminous substrate. 

Frequently asked questions

For mineral, weakly bound but stable substrates, we recommend a TEROSON primer. In adverse weather conditions, it is always necessary to use an adhesion promoter on mineral substrates.

The adhesive width for the frame profile is 20-30mm, this is already specified by the self-adhesive strip of the respective sealing foil. The adhesive width varies from 30-50 mm depending on the structure of the product, the current technical data sheet for the product is decisive. Note: Depending on the project, the adhesive width can be increased on smooth, clean and stable substrates after consultation with the TEROSON facade expert. Also can be lower.

Overlapping film joints are glued on top of each other with a width of approx. 50 mm. An additional mechanical fastening of the TEROSON sealing foils is generally not required.