TEROSON FO 2 SK 2

WATERTIGHT, VAPOR-PERMEABLE AND ELASTIC SEALING MEMBRANE SYSTEM

  • Equipped with two 25 mm self-adhesive strips
  • Vapor-permeable (sd value: < 1 m)
  • Easy application

Features and benefits

The new vapour-permeable facade foil with revolutionary PSA self-adhesive strips for quick assembly. For a safe, direct connection sealing of the elements with the structure.

Properties

Description

The new TEROSON® FO 2 SK 2 vapour-permeable facade film with PSA-Hybrid technology sets a new benchmark. The solution for the systematic, waterproof, but highly permeable connection seal in the outdoor area – especially of facade elements, windows, attics and lower window connections. In terms of building physics, it is convincing in all aspects. It is more tear-resistant and much more sticky than before and ensures for decades the safety of building envelopes.

Documents and downloads

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

SUBSTRATE PREPARATION

Clean the substrate before fixing the sealing strip. The areas to be sealed must be load-bearing, sound and free from dust, release agents, oil, grease, sintered layers and other substances that may impair adhesion. All metal substrates, e.g. element surfaces of aluminium or zinc, must be free of oxide layers and release agents.

CERESIT Tiling CE60 LP Instructions Illustration Step 2

APPLICATION: Use of primers

On mineral, weakly bound but load-bearing substrates it is recommended to apply a TEROSON primer. At low temperatures and damp substrates, TEROSON PR PRIMER M+S is well suited for this purpose. 

CERESIT Tiling CE60 LP Instructions Illustration Step 3

CONNECTION SEALS ON WINDOWS / FACADES

After removing the 30 mm wide release film, the sealing strip can be fixed cleanly and efficiently to the profile / building substrate. Press the sealing strip firmly down with a TEROSON hard rubber roller so that it cannot slip when the next steps are carried out. Roll the strip over with a pressure roller. 

Related products

  • ${/content/heliux/adhesive/teroson/com/en/products/central-pdp#/teroson-pr-primer-ms/SAP_0201IOT065K8/searchResult.productFields.MainImageAltText}
    TEROSON PR PRIMER M+S
    Bonding course and surface strengthener for mineral and bituminous substrate. 
  • ${/content/heliux/adhesive/teroson/com/en/products/central-pdp#/teroson-ad-kds/SAP_0201ILT062H6/searchResult.productFields.MainImageAltText}
    TEROSON AD KDS
    Special polymer for the universal bonding of sealing strip systems in the area of window/facade installation and metal construction. 

Frequently asked questions

We recommend a TEROSON primer for mineral, weakly bound but stable substrates. In adverse weather conditions, it is always necessary to use an adhesion promoter on mineral substrates.

The adhesive width for the frame profile is 20-30mm, this is already specified by the self-adhesive strip of the respective sealing foil. The adhesive width varies from 30-50 mm depending on the structure of the product, the current technical data sheet for the product is decisive. Note: Depending on the project, the adhesive width can be increased on smooth, clean and stable substrates after consultation with the TEROSON facade expert. Also can be lower.

Overlapping film joints are glued on top of each other with a width of approx. 50 mm. An additional mechanical fastening of the TEROSON sealing foils is generally not required.