-
EMICODE® EC1 Plus certified
-
Solvent- and isocyanate-free
-
High yield
-
Rapid drying
-
Can be used on damp substrates
TEROSON® PR PRIMER ECO is a specially developed adhesion promoter that forms a permanent bond with the substrate. It produces a load-bearing surface to ensure a durable bond with TEROSON sealing strips. Sealing strips plus primer form a system of perfectly matched components. On porous and mineral substrates, PR PRIMER ECO is used to produce a load-bearing surface.
Mineral substrates must be load-bearing, sound and free of oil, grease and release agents. The building substrate should be smooth and even. When using the primer on brickwork, it is normally necessary to apply a smooth trowel finish beforehand. Before applying the primer, remove any impurities, sintered layers, concrete fins or ridges, mortar residues or loose parts.
TEROSON PR PRIMER ECO is applied by roller or paste brush on the mineral substrate. Substrates with a high dust load must be mechanically cleaned before applying the primer, e.g. with a scrubbing brush, hand brush or vacuum cleaner. After application, allow the primer to flash off for approx. 20 to 50 minutes.
Yes, the product is very low in emissions and has the EMICODE EC1 plus certificate.
The product is vulnerable to frost. The temperature during storage must not fall below +5 °C. Can be stored for 12 months.
Depending on the absorbency of the substrate, the consumption is between 90-120 g/m².