TEROSON SE 20

Acrylic sealant for low-load joints

  • Elastoplastic: 10 % movement accommodation
  • Easy gun application
  • Compatible with all kinds of paints

Features and benefits

Gun-applied acrylic sealant for joints subject to low stresses – indoor use

Properties

Description

TEROSON® SE 20 is an acrylic sealant, generally compatible with paints ,easy to apply by gun, virtually odorless and self-adhesive on most common building substrates.

Documents and downloads

How to use

SUBSTRATE PREPARATION

The surfaces to be bonded/joint edges must be clean, dry and free of grease. TEROSON SE 20 adheres without primer on substrates such as plasterboard, concrete, gas concrete, aerated concrete, varnished wood (closed-pore or open-pore), brickwork and rigid PVC. Old sealants and other residues must be completely removed. The bonding surfaces must not be covered with a water film.

APPLICATION:

TEROSON SE 20 is a gunnable, physically drying 1-component sealant that is applied by means of a hand or compressed air gun. Uneven areas can be smoothed with a trowel, paint brush or jointing iron after slightly moistening the tool or sealant surface with water. We recommend masking the joint edges with a self-adhesive tape before applying the sealant. 

CLEANING

Immediately remove excess sealant or stains with a wet cloth or spirit. After curing, the sealant can only be removed mechanically. 

Related products

  • ${/content/heliux/adhesive/teroson/com/en/products/central-pdp#/teroson-fo-2-fr/SAP_0201INT064W2/searchResult.productFields.MainImageAltText}
    TEROSON FO 2 FR
    The ultimate sealing strip for modern facades. Flame retardant and waterproof fire protection membrane for effective fire protection of the exterior facade. 
  • ${/content/heliux/adhesive/teroson/com/en/products/central-pdp#/teroson-fo-150-foil-tack-ms/SAP_0201INT065N5/searchResult.productFields.MainImageAltText}
    TEROSON FO 150 FOIL-TACK M+S
    Full-surface self-adhesive special sealing strip, water-, air- and diffusion-tight, equipped with hotmelt technology for facade elements, windows, house door connections 

Frequently asked questions

Yes, the product is very low in emissions and has the EMICODE EC1 plus certificate.

The elasticity of this pure acrylate sealant is 10%.

The product is vulnerable to frost. The temperature during storage must not fall below +5 °C. It is best between +5 °C and +25 °C. Can be stored for 18 months.