Skip to Content

TEROSON FO KSK M+S

Full-surface self-adhesive strip system for sealing against moisture

  • Self-adhesive over its entire surface
  • No additional mechanical fastening
  • Equipped with an asymmetrically release paper

Features and benefits

Full-surface self-adhesive sealing strip for waterproofing ground-contacting structural components according to DIN 18533.

Properties

Description

TEROSON® FO KSK M+S - full-surface self-adhesive strip system for sealing against moisture (capillary and retained water) and non-accumulating seepage water in compliance with DIN 18533, parts 1 and 2.

Documents and downloads

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

SUBSTRATE PREPARATION

Clean the substrate before fixing the sealing strip. The areas to be sealed must be sufficiently dry, level, load-bearing, frost-free, clean and free from oil, grease, tar, gravel pockets, cracks, dust, dirt, mortar residues and other impurities or substances that may impair adhesion.Sharp or pointed irregularities must be removed.

CERESIT Tiling CE60 LP Instructions Illustration Step 2

APPLICATION: Use of primers

On mineral, weakly bound but load-bearing substrates it is necessary to apply a TEROSON primer. Particularly suitable and recommended at low temperatures and on damp substrates of any kind is TEROSON PR PRIMER M+S. On wet substrates (no standing water), use TEROSON AD Adhesive Spray. 

CERESIT Tiling CE60 LP Instructions Illustration Step 3

CONNECTION SEALS ON FACADE PROFILES

The foil is applied in the 1st step with a width of ≥ 30 mm cleanly and efficiently to the profile. In the 2nd step, pull the release paper evenly off the selfadhesive coating. Pull at a slight angle, moving from the edge of the strip in the direction of the middle towards the perforation. Press the sealing strip using the hard TEROSON rubber roller. 

Related products

  • ${/content/heliux/adhesive/teroson/com/en/products/product#/teroson-pr-primer-ms/SAP_0201IOT065K8/searchResult.productFields.MainImageAltText}
    TEROSON PR PRIMER M+S
    Bonding course and surface strengthener for mineral and bituminous substrate. 

Frequently asked questions