Even though vapour barrier sealing has long been used in façade construction on the warm side, i.e. the inside: More and more often, 100% vapour-tight solutions are required by architects and in terms of building physics. This is particularly true for connection seals in the field of air conditioning and ventilation construction, for rear-ventilated façade constructions and, above all, whenever metal meets metal. And ‘100 % vapour-tight’ is not a loose claim, but a firmly defined value that requires an sd value of over 1500 m. So it’s time to do even more justice to our own professional standards and fulfil the highest requirements for fixed sealing tapes too.
We are TEROSON. We are constantly developing ourselves and our products. And we think accordingly. So you can rely on more than just innovative, effective product solutions for all window and façade sealing work. You can also rely on professional all-round support that you can only get from an expert – with everything that goes with it for us: from advice to service.
The new, enhanced sealing tape for façades with aluminium composite foil applied to one side and an sd value >1500 m – for the highest requirements in terms of vapour tightness.
NEW STRENGTH
Thanks to an sd-value >1,500 m, it is 100% vapor-tight in accordance with Standard 4108-3
RECOGNISED QUALITIES
- Highly screw-through resistant
- Extremely tear and tear propagation resistant
- Available in various dimensions*
- Self-adhesive
- Compatible with bitumen
- Also as a universal sealing and repair tape
- For maximum flexibility: indoor and outdoor use
- No primer required on non-absorbent substrates
- UV-stable and highly resistant to ageing
*TA ALU Repair tape is available in the following widths:
- 28 m 40 x 0,9 mm
- 28 m 50 x 0,9 mm
- 28 m 60 x 0,9 mm
- 28 m 75 x 0,9 mm
- 25 m 100 x 1,1 mm
- 25 m 150 x 1,1 mm
- 25 m 180 x 1,1 mm
Cross-laminated, one-sided aluminium-laminated, now 100% vapour-tight fixed tape with sd value >1500 m for targeted connection sealing wherever metal meets metal.
- For indoor and outdoor use
- High-quality solution for demanding work in joint areas
- 100% vapour-tight
- Screw-through resistant
- Fully self-adhesive over the entire surface
- Weather-resistant and UV-stable
- Tear and tear resistant
The TA ALU Fixband from TEROSON has been something special for years because the film structure with special butyl coordination and in combination with a cross-laminated, extremely tear-resistant plastic-aluminium composite film can guarantee that it will remain tight even if it is punctured and screwed through.
In other words, it was and is the self-adhesive, high quality solution for the highest quality, watertight and screw-through-proof seals in conservatory, air conditioning and ventilation, aluminium and metal construction.
This solution is now even more watertight in the truest sense of the word – with a feature that increases the vapour tightness to over 1500 m. And thus truly fulfils the highest requirements in every respect.